For cleaning a wooden deck, you’ll be best served by using the lowest pressure setting that’s still effective. For soft woods like cedar or pine, this is usually about
Choose the right tip to use as well. For wood cleaning, generally a fan tip or rotating tip (used carefully) will work best. Remember to always start the water pressure in a safe area pointing away from people and glass windows, and start at least two feet from the wood deck, then feather the pressure into range from about a foot to 18 inches from the deck. Never get closer than 12 inches from the deck unless you’re using low pressure. TESTIMONIALS
Are you looking for exterior paint vs. stain for your house — how to choose, what’s best for your siding, colors, or how to apply it? Here’s a clear guide to help you decide and get started.
🏡 Exterior Paint vs. Stain — What’s the Difference?
🖌️ Exterior Paint
- Opaque & solid color — hides wood grain.
- Best for: wood, fiber cement (Hardie board), stucco, masonry, metal — basically most exterior surfaces.
- Pros:
- Strong UV protection.
- Wide color choices.
- Great for covering imperfections.
- Cons:
- Peels over time — needs repainting every 7–15 years (depending on climate & prep).
- Requires good surface prep.
🎨 Exterior Stain
- Transparent to semi-transparent — lets grain show.
- Best for: natural wood siding, cedar shakes, log homes, fences, decks.
- Pros:
- Enhances wood grain.
- Penetrates wood — can last long if maintained.
- Fades more naturally than peeling paint.
- Cons:
- Less dramatic color options.
- Doesn’t cover flaws like paint does.
🧰 Choosing the Right Finish
Here’s how to choose based on your home:
| Surface Type | Best Option |
|---|---|
| Wood siding (cedar, pine) | Stain (semi-transparent or solid stain) |
| Fiber-cement board | Paint |
| Stucco | Paint |
| Brick | Paint (or clear masonry stain) |
| Log home | Stain |
Note: “Solid stain” behaves much more like paint — opaque and protective — but with some advantages of stain.
🎨 Color & Style Tips
- Match your home style: Traditional homes often look great in muted, classic colors; modern homes can go bold.
- Consider trim contrast: A lighter trim color against a darker body adds depth.
- Test first: Buy sample cans and paint/stain boards to see color in sun & shade.
🪛 Prep & Application Basics
Good prep = long-lasting finish:
- Clean the surface: Remove dirt, mildew, chalking (pressure-wash or scrub).
- Repair damage: Replace rotten wood, caulk gaps.
- Prime (for paint): Use a quality exterior primer for bare wood/repairs.
- Apply in proper conditions:
- Avoid direct hot sun and temperatures below ~50°F (10°C).
- Follow manufacturer’s dry-time directions.
- Tools: Brushes for edges, rollers for large panels, sprayer for speed (back-roll/scrub to ensure adhesion).
🧴 Maintenance
- Paint: Touch up every few years; expect a full repaint every decade or so depending on sun & weather.
- Stain: Re-apply when wood starts to look dry, faded, or water no longer beads on surface — typically 2–5 years for transparent/semi stains.
🏘️ Quick Recommendations (General)
- Neutral, timeless paint: Soft gray, cream, deep charcoal.
- Semi-transparent stain for wood: Natural cedar tones or subtle tints.
- Solid stain: If you want a painted look with easier maintenance on wood.
If you want more specific recommendations,
- Your siding material (wood, fiber cement, brick, etc.)
- Color preferences
- Climate (sunny, humid, cold)
- Budget/timeframe for the project
